05-24 Nissan Frontier Crewcab 4-6.5” Subwoofer box. Listed below are the subwoofers this box will fit for sure. Will fit other subwoofers with similar hole cutouts and depth.
I strongly recommend checking the sub list below for the sub you plan to use to make sure it will fit.
When Purchasing Subs, Dual 2 ohm are recommended to get a 1 ohm load at the amplifier.
This is a hand crafted 3/4 MDF / Fiberglass box made to perfectly fit under the rear seat of the Nissan Frontier crew cab trucks from 2005-2024 (Will not fit King cab models) only Crew cabs with full size rear doors.
This is a fastener free enclosure, meaning there are no screws or nails. All glue/resin construction so you won’t see any blemishes later down the road.
Box also includes 4 sets of 14 gauge tinned ofc copper speaker wires for each sub and jumper wires to change ohm loads
You will have to remove the factory subwoofer and or storage trays for this to fit. No seat lift required
1 ohm stable amplifier 1200-2000 watts rms recommend
This enclosure also features an engraved Frontier logo.
This box is 1.25 cubes of airspace that is tuned at 35hz using a 3.75” octagon port. This thing likes the lows. It will play well in the ranges from 55hz to 28hz
If when installed you don’t get the low frequencies, you may want to look into your radio settings or the rca line out converter used for factory radio. Sometimes the factory radio limits low frequencies to keep from damaging the factory speakers.
Any questions feel free to reach out.
Recess hole cutout size = 7.375 inches
Mounting hole size = 6 inches
Max depth of subwoofer = 5.5 inches
Max motor diameter = 5.5 inches
Subwoofers this box for sure fits:
CT Sounds Meso-6-5
Audiopipe TXX-BDC4-6
DB Drive WDX6.5G2
DB Drive Euphoria EWX6NEO
DB Drive WDX6.5G1
Massive Audio SUMMO64XL
Massive Audio HIPPOXL64
Sundown SA-6.5SW
DD Audio 606d
Toro Fierce 6
DC Audio M3 6.5